The system's general parameters declaration screen opens (name IID (system
identification number)):
AASTRA 5000 CONFIGURATION /
*-------------------------------------------------*
| DO YOU WANT TO CONFIGURE NAME/IID (Y/N):
• If you answer YES, "
parameters (11 digits).
AASTRA 5000 CONFIGURATION /
*-------------------------------------------------*
| NAME: A5000 |
| IID: 00130927001 |
*-------------------------------------------------*
DO YOU WANT TO CHANGE CONFIGURATION Y(ES)/N(O) ?
• Validate the modifications with the "Return" key, after confirming or rejecting them by
pressing "y" or "n".
9 Configuring call distribution
AASTRA 5000 CONFIGURATION /
*-------------------------------------------------*
| DO YOU WANT TO CONFIGURE CALL DISTRIBUTION:
*-------------------------------------------------*
• Press "Return" to confirm, after entering "
If the answer is "
AASTRA 5000 CONFIGURATION /
AN EXISTING CONFIGURATION WAS FOUND
*-------------------------------------------------*
| SUBSCRIBER: 3005 |
| DID: 4000 |
*-------------------------------------------------*
DO YOU WANT TO CHANGE CONFIGURATION Y(ES)/N(O) ?
SUBSCRIBER:
This field is used to assign a subscription number as day and reduced number to call
distribution 0. This number is assigned if it corresponds to an internal subscription which
can be added to a call distribution service, or if it corresponds to the number of a
subscription that may be on the multi-site network (A5000 Server).
DID:
Installation and Maintenance Manual - Aastra 5000
INSTALLING A5000 SERVER (Non-redundant)01/2011
Name&IID
y
", the next screen allows you to declare the system's general
Name&IID
Call Dist
y
", enter the corresponding values.
Call Dist
Y
|
Y
Y
|
y
n
" or "
".
Y
AMT/PTD/PBX/0058/4/6/EN
Page 465