Indicators - Aastra AXD Installation And Maintenance Manual

4.7.2.2

Indicators

The UCV-S card includes 2 sets of 5 superimposed indicators, each indicator can have
2 LEDs:
INDICATOR
EIP No.1 ON green
Lnk/Speed Off: ON yellow
inactive
EIP No. 2 ON green
ON yellow
DISK ON green
SHTD Red flashing
Linux shutdown ON green
Off
RUN (green) On steady
Flashing
PWR (green) On steady
Flashes slowly
Off or rapid flashing
BVF Green flashing
(green/orange) ON green or OFF
ON orange
S.EXT ON green
(green/red)
ON red
Off
AMT/PTD/PBX/0058/4/6/EN
Page 180 01/2011
STATE
100 MHz, activity on Ethernet link: EIP daughter card No.1
10 MHz, activity on Ethernet link: EIP daughter card No.1
100 MHz, activity on Ethernet link: EIP daughter card No.2
10 MHz, activity on Ethernet link: EIP daughter card No.2
Disk is being used
PBX shutting down
Power off authorisation
Normal operation
Operating problem
Card in operation
If one cabinet, indicates mains presence and operation of the
rectifier in the cabinet power supply unit.
If two cabinets (main cabinet and expansion cabinet), indicates
mains presence and operation of the rectifier in the power supply
unit of both cabinets.
If one cabinet, indicates mains failure and thus cabinet operation
with the battery.
If two cabinets (main cabinet and expansion cabinet), indicates
mains failure and thus operation of both cabinets with batteries.
Abnormal operation.
Examples: expansion cabinet not powered, expansion cabinet
powerd by battery and main cabinet powered from the mains...
Run (Voice mail operating)
Voice mail not working (BVF not activated or faulty)
BVF initialising
Correct synchronisation clock (primary network or DECT port)
Synchronisation clock fault alarm
No correct synchronisation clock (primary network or DECT port)
TABLEAU 4.21 PRESENTATION OF UCV-S CARD INDICATORS (1/2)
Description des sous-ensembles
EXPLANATION
Installation and Maintenance Manual - Aastra 5000