Aastra AXD Installation And Maintenance Manual page 343

AASTRA 5000 CONFIGURATION / SIP SERVICE
AN EXISTING CONFIGURATION WAS FOUND
*-------------------------------------------------*
| FTP : 1
| TMA : 1
| DHCP : 0
*-------------------------------------------------*
DO YOU WANT TO CHANGE CONFIGURATION Y(ES)/N(O) ?
After this series of screens concerning TMA, FTP and DHCP services, the system's
general parameters declaration screen opens (name, IID (system identification number)):
AASTRA 5000 CONFIGURATION / N
*-------------------------------------------------*
| DO YOU WANT TO CONFIGURE NAME/IID (Y/N):
• If you answer YES, "
parameters.
• Fill in successively the different fields, using the Return key to change line.
AASTRA 5000 CONFIGURATION / N
*-------------------------------------------------*
| NAME: A5000 |
| IID: 00130927001 |
*-------------------------------------------------*
• After the last line is validated, a summary of the network parameters is displayed for
confirmation.
• If the values are correct, press "Return" to confirm, after pressing "
The next screen is used to configure call distribution.
AASTRA 5000 CONFIGURATION /
*-------------------------------------------------*
| DO YOU WANT TO CONFIGURE CALL DISTRIBUTION:
*-------------------------------------------------*
• Press "Return" to confirm, after entering "
If the answer is "
line.
Installation and Maintenance Manual - Aastra 5000
Installation and activation
ame&IID
y
", the next screen allows you to declare the system's general
ame&IID
Call Dist
y
", fill in successively the different fields, by pressing Return to change
01/2011
|
|
Y |
Y |
y n
" or " ".
AMT/PTD/PBX/0058/4/6/EN
y
".
Page 343