Aastra AXD Installation And Maintenance Manual page 419

SHEET E-5
REPLACING A VADS VENTILATION MODULE
AVAILABILITY
• Full mission capable
OPERATORS (s)
• 1 operator on site
DURATION
• 1 minute 30 seconds
• 1 standard tool case
INGRÉDIENT(S)/CONSOMMABLE(S)
• N/A.
See Figure 4.3 for an overview of the power supply module.
Table 8:
OPERATION
• Alert the operator.
• Check the functional
technical state of the new
VADS ventilation module.
• Remove the ventilation
module.
• Fit the new
ventilation module.
Installation and Maintenance Manual - Aastra 5000
Maintenance
DETAILS OF THE OPERATION / COMMENTS
• In the case of remote operation, contact the remote operator
before starting any operation.
• Check that the functional technical state of the new ventilation
module is compatible with the old one.
Avertissement :
90 seconds to make the replacement. After 90 seconds,
the power supply module is automatically powered off.
• Unscrew the two securing screws on the front panel of the
ventilation module.
• Remove the ventilation module using its handles.
VADS • Insert the ventilation module in its slot and push it fully home.
• Secure the ventilation module onto the iPBX structure using its
two captive screws.
The operator
AMT/PTD/PBX/0058/4/6/EN
01/2011
has about
Page 419