Physical Description (See Figure 4.62 ) - Aastra AXD Installation And Maintenance Manual

4.14.13.3Physical description (see Figure 4.62 )

Connectors
NAME
J1
J4 to J11
L0 to L3
1
Indicators : The indicators are located on the card circuit and not on the front
INDICATOR
D1.x (green) (1)
(1) x: INDICATOR number, each INDICATOR is assigned to a network line
AMT/PTD/PBX/0058/4/6/EN
Page 286 01/2011
FUNCTION/CHARACTERISTIC
96-pin connector:
backplane connection.
Couples of connectors used for fitting the
DTOC, FTXA or FTXC daughter cards,
one card per analogue line
RJ45 connectors:
each socket provides one connection to an
analogue network line
TABLEAU 4.79 DESCRIPTION OF THE LR4 CARD CONNECTORS
STATE
Off
On
Flashing
TABLEAU 4.80 PRESENTATION OF THE LR4 CARD INDICATORS
Description des sous-ensembles
• Pin 4: network line (i)+
• Pin 5: network line (i)-
• Pins 1, 2, 3, 6, 7, and 8: NC
EXPLANATION
Status of line x (1) :
• Line idle
• Line used
• Pulse dialling rate
Installation and Maintenance Manual - Aastra 5000
CONTACTS
panel.