Aastra AXD Installation And Maintenance Manual page 322

AASTRA 5000 CONFIGURATION / NETWORK
*-------------------------------------------------*
| ENTER IP ADDRESS: 100.100.40.150 |
| ENTER NETWORK MASK: 255.255.255.192 |
| ENTER GATEWAY: 100.100.40.129 |
*-------------------------------------------------*
After the last line is validated, a summary of the network parameters is displayed for
confirmation.
AASTRA 5000 CONFIGURATION / NETWORK
*-------------------------------------------------*
| SUMMARY |
*-------------------------------------------------*
*-------------------------------------------------*
| IPADR = 100.100.40.150 |
| NETWORKMASK = 255.255.255.192 |
| GATEWAY = 100.100.40.129 |
| NETWORKADR = 100.100.40.128 |
| BROADCAST = 100.100.40.191 |
*-------------------------------------------------*
DO YOU CONFIRM (Y/N)?
If the summary is not correct:
• Press "
• If the summary is correct:
• Press "
Nota :
By default, the EIP card(s) is/are automatically assigned an address and is/are
automatically activated. The values assigned are IPADR + 1 and IPADR + 2 (in case of
two EIP cards)
Attention :This feature may result in IP address clashes. It is advisable to
AMT/PTD/PBX/0058/4/6/EN
Page 322 01/2011
Y
n
" to restart network pre-configuration.
y
" and confirm by pressing "Return".
IP address is correct for your address plan.
Installation and activation
Installation and Maintenance Manual - Aastra 5000
check that the EIP card