Physical Description (See Figure 4.55 ) - Aastra AXD Installation And Maintenance Manual

4.14.5.3 Physical description (see Figure 4.55 )

Connectors
NAME
J1
L0 to L15
8 1
Indicators
This card has no signalling indicator.
4.14.5.4 Hardware configuration
The LN16X card has no configuration microswitch.
4.14.5.5 Installation and wiring
The LN16X card can be hot-plugged in an AXD, AXL, AXS or AXS12 iPBX in normal
operation.
It is essential to respect the standards between weak and strong currents.
The distance between the telephone cable and the source of interference (electrical
conductor, mains, fluorescent light with starter, etc.) must be at least 30 cm (12 in).
Do not connect two telephone sockets to the iPBX at the same time.
Digital telephones cannot be used as emergency sets (e.g. during a power failure)
Installation and Maintenance Manual - Aastra 5000
Description des sous-ensembles
FUNCTION/CHARACTERISTIC
96-pin connector:
backplane connection.
RJ45 connectors: each socket provides
one connection to a digital set
TABLEAU 4.73 DESCRIPTION OF LN16X CARD CONNECTORS
• Pin 4: digital set (i)+
• Pin 5: digital set (i)-
• Pins 1, 2, 3, 6, 7, and 8: NC
AMT/PTD/PBX/0058/4/6/EN
01/2011
CONTACTS
Page 269