Installing A Cabinet (Axl, Axs, Axs12 And Axs6) - Aastra AXD Installation And Maintenance Manual

6.2.3

Installing a cabinet (AXL, AXS, AXS12 and AXS6)

The various installation options of an Aastra XS/XL cabinet are given in the following
table:
CABINET
AXS/AXS12/
AXS6
AXL
1) If laid on a piece of furniture, a CPU and a PC console may be superimposed in the
AXS, AXS12 or AXS6 cabinet.
2) The cabinets in an A2XS, A2XL or A3XL version can be placed on a piece of furniture,
on top of one another.
3) When mounting a cabinet on a wall (AXS, AXS12 or AXS6), the front panel of the
cabinet can face upwards or downwards. However, we recommend turning it upwards.
A minimum clearance is required for air circulation:
• 55 mm on the left and right side for AXS, AXS12 and AXS6 cabinets.
Read the environmental constraints described in section 6.2.1.3.
Hardware required
• 1 mounting kit (2 brackets + 4 screws)
• 4 pins and 4 securing screws for wall mounting
• Screws and captive nuts for fitting in a rack
Installation and Maintenance Manual - Aastra 5000
Installation and activation
STACKED INSIDE A CABINET
With 2-position mounting kit:
(1) (2)
• Flush position
(2) With 2-position mounting kit
(flush and recessed)
TABLEAU 6.2 OPTIONS FOR INSTALLING A CABINET
01/2011
ON A WALL
Vertically 3)
AMT/PTD/PBX/0058/4/6/EN
Page 317
Not