Physical Description - Aastra AXD Installation And Maintenance Manual

4.3.2

Physical description

NAME
J1 (rear panel) Female connector, 192 pins:
•
•
J2 (rear panel) Female connector, 48 pins:
•
•
J3 Female connector, 48 pins:
•
•
J13 and J14 CMS 80-pin connectors: receive two optional daughter
cards - EIP No. 1 on J13 and EIP No.2 on J14 – to
increase the capacity of the VoIP function.
J10A and J10B HE14 connector
CONSOLE Local access to operation in specific mode
(1)
1
5
9 6
USB (B) USB connector in DEVICE mode
(1)
LAN RJ45 8-pin connector: host the Ethernet 10/100BASE-
TX LAN access.
(1)
1 8
(1) Connector front view.
Installation and Maintenance Manual - Aastra 5000
Description des sous-ensembles
FUNCTIONS/CHARACTERISTICS
Backplane connection
Includes the synchronous junctions (equipment
bus) used in the main cabinet, the reference clocks
and system bus.
Backplane connection
Link with the connector of the
expansion cabinet.
Backplane connection
Used for specific duplex
Note: Applications that use the
VTI/XML protocol (i2052 in
CTI, TWP mode) can be
connected directly to the
LAN port.
TABLEAU 4.5 DESCRIPTION OF UCV-D CARD CONNECTORS
RUCV
card in an
UCV
signals.
AMT/PTD/PBX/0058/4/6/EN
01/2011
CONTACTS
• Pin 1: DCD
• Pin 2: RXC
• Pin 3: TXC
• Pin 4: DTR
• Pin 5: GND
• Pin 6: DSR
• Pin 7: RTS
• Pin 8: CTS
• Pin 9: RI
• Pin 1: NC
• Pin 2: DNEG2
• Pin 3: DPOS2
• Pin 4: User ID
• Pin 5: GND
• Pin 1: TXP
• Pin 2: TXM
• Pin 3: RXP
• Pin 4: TLBR
• Pin 5: TLBR
• Pin 6: RXM
• Pin 7: RLBR
• Pin 8: RLBR
Page 143