EQT. RUN
flashing green
(front panel)
4.12.3
Hardware and software configuration
This card does not require any hardware or software configuration.
4.12.4
Installation and wiring
Connecting an RUCV-S card to a UCV-S card requires a specific cable provided with the
expansion cabinet (cable HT8212AA01).
Note: The basic cabinet does not have any internal connector for the inter-cabinet wire. Therefore,
the expansion ribbon (delivered with the expansion cabinet) must be connected to basic
cabinet.
Installation and Maintenance Manual - Aastra 5000
Description des sous-ensembles
Accessing one of the cabinet expansion cards
TABLEAU 4.32 DESCRIPTION OF RUCV-S CARD INDICATORS
01/2011
AMT/PTD/PBX/0058/4/6/EN
Page 207