H01919
H01956
H01956
Workshop Manual Ed. 03-2012
ENGINE DISASSEMBLY/REASSEMBLY
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
Stator disassembly
• Disassemble the following parts:
- Screws (1) and (2)
- Cable retaining plate (3)
- Rubber sheath (4)
- Stator (5)
Freewheel disassembly
• Disassemble the following parts:
- Screws (1)
- Flywheel (2)
- Freewheel (3)
Freewheel assembly
• Clean freewheel (3) threaded holes.
• Position flywheel (2) onto freewheel (3).
• Fit screws (1).
Tightening torque figures
Freewheel body onto flywheel
M6 x 12 - 10.9, Cross-head
microincapsulated screw
F1.20
replacement
Pre-tightening torque, 3 Nm
Final tightening torque, 25 Nm