Husqvarna TC 449 2011 I.E. Workshop Manual page 81

TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 511 2011/2012 I.E.
11
12
GENERAL PROCEDURES
SMR 449 2011 I.E.
- With a 8 mm socket wrench, undo screw (11), and remove the screw with
rubbers and spacers.
On reassembly, tighten screw (11) to 10 Nm - 1.0 Kgm - 7.38 ft/lb.
H02424
- Remove tank (12) and drain any residual fuel through cock.
For upper tank removal, refer to the rear chassis removal para-
graph.
H02423
E.13
Workshop Manual Ed. 03-2012