Fuel Supply Hose Inspection - Husqvarna TC 449 2011 I.E. Workshop Manual

1
4
5
Workshop Manual Ed. 03-2012
SETTINGS AND ADJUSTMENTS
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Fuel supply hose inspection

MY11
Check fuel supply hose conditions; if cracked, swollen etc. it is necessary
to change it as follows:
- Remove the saddle and left-hand side panel, as described in the relevant
paragraphs.
- Release the control unit (1) off its mounts and remove it from its housing.
H11157
- Using a Phillips screwdriver, loosen the clamp (2) connecting the tube (3) to
throttle body (4).
- Remove the front tank (tank with pump) as described in the corresponding
paragraph.
- Slide the tank (5) with tube (3) connected off the bike.
2
- Using the suitable pliers, open clamp (6) and remove tube (3) from
the fuel pump.
- Reassemble all parts, in the reverse order compared to disassembly.
3
H006167
3
H006168
1
3
6
D.28
MY12
H11158
H006169