Husqvarna TC 449 2011 I.E. Workshop Manual page 226

FRONT SUSPENSION
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
Sommario
Front fork removal ........................................................................................ I.3
Service instructions for Ø48USD Kayaba fork.............................................. I.5
Front suspension (TC - TXC) ....................................................................... I.6
Front fork disassembly (TC - TXC) ............................................................... I.7
Front suspension (TE) ................................................................................ I.17
Front fork disassembly (TE) ....................................................................... I.18
Instructions for use of ø50USD fork (SMR) ............................................... I.27
Front suspension (SMR)............................................................................. I.28
Components of the fork .............................................................................. I.29
General rules for a proper overhauling ....................................................... I.30
Instructions for clamping in the vice ........................................................... I.31
Problems - Possible causes - Solutions ..................................................... I.32
Cleaning the dust seal ............................................................................... I.33
Bleeding the air........................................................................................... I.33
Draining the oil............................................................................................ I.34
Braking down the pumping element and the bottom valve ......................... I.35
Braking down the fork leg - slider and removing the oil seals.................... I.37
Overhauling and modifying the cartridge and bottom valve setting ............ I.38
Cartridge overhauling (rebound braking) .................................................... I.38
Bottom valve overhauling (compression braking)....................................... I.39
Re- assembling the fork leg - slider and oil seals ...................................... I.40
Re- assembling the pumping element unit and the bottom valve ............... I.42
Filling with oil .............................................................................................. I.45
Workshop Manual Ed. 03-2012
I.2