Rear Mudguard Removal (Smr My11 / My 12 - Te-Txc-Tc My11) - Husqvarna TC 449 2011 I.E. Workshop Manual

2
4
3
Workshop Manual Ed. 03-2012
GENERAL PROCEDURES
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Rear mudguard removal (SMR MY11 / MY 12 - TE-TXC-TC MY11)

-
-
1
H02407
H02408
-
H02409
Remove the saddle, the two side panels and the number plate holder (TE -
SMR) as described in the relevant paragraphs.
Using a 8 mm wrench, loosen the two screws (1) positioned under rear
mudguard, disconnect connector (2) (TE - SMR), and remove tail light.
Using a 8 mm wrench, loosen the two front retaining screws (3), and remove
the complete mudguard (4).
E.8