Disassembly/Reassembly Of The Gearbox (6 Speed) (Te-Txc-Sms) - Husqvarna TC 449 2011 I.E. Workshop Manual

Workshop Manual Ed. 03-2012
ENGINE DISASSEMBLY/REASSEMBLY
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Disassembly/Reassembly of the gearbox (6 Speed) (TE-TXC-SMS)

Caution
During operation, gear wheel sets slide one towards the other. If just one
coupling gear is replaced, the load bearing capacity on gears may be-
come significantly worse.
Replace gear wheels together with the coupled wheels, only.
Caution
Reinstall the input shaft and output shaft as indicated in the figure, paying
attention not to damage the roller cages, the washers and snap rings.
• Upon reassembly, always use new snap rings.
• Lubricate bearing, shaft and gears.
Consumables
Molykote D Paste
F1.88
Clear solid lubricant for metal part assem-
bling and settling