Husqvarna TC 449 2011 I.E. Workshop Manual page 277

TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 511 2011/2012 I.E.
5
6
7
8
10
9
REAR SUSPENSION
SMR 449 2011 I.E.
- Loosen the two screws (5) using an 8 mm wrench, and remove rear brake
hose support (6) to slide out the pin (7).
H006186
- Using a 17 mm wrench, loosen nut (8) and remove pin (7) on the other side.
H006188
H006187
- Using a 10 mm Allen wrench, loosen pins (9) and remove swinging arm (10).
H006189
J.7
10
H006190
Workshop Manual Ed. 03-2012