Tail Section Removal (Tc-Te-Txc My12) - Husqvarna TC 449 2011 I.E. Workshop Manual

3
4
6
H11165
Workshop Manual Ed. 03-2012
GENERAL PROCEDURES
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
- Right-hand side panel:
Loosen the five screws (3) using an 8 mm wrench, release side panel (4)
from scoop (5) by disengaging retaining tabs (6).
3
H006113
5
H006114

Tail section removal (TC-TE-TXC MY12)

- Remove the side panels as described in the relevant paragraph.
- Loosen the four self-tapping screws (1).
- Loosen the screws (2) using a suitable tool.
- Pull the plastic parts apart slightly and slide the tail section (3) off towards
the rear of the motorcycle.
E.4
H11166