Alternator- Checking The Stator; Winding - Husqvarna FC 450 2018 Repair Manual

21 IGNITION SYSTEM
21.4
Stator winding - checking the short circuit to ground (terminal 31).
I
Resistance
270
Alternator - checking the stator winding
1
�
63mm
P00023-10
1
�
6. 3 mm
P00023-10
Measure the resistance between the specified points.
Alternator, connector
CR
If the indicated value does not correspond to the setpoint value:
- Change the stator.
-
Remove the spark plug with special tool
I Spark plug wrench with link (77229172000)
-
Mount and tighten the new spark plug using the special tool.
Guideline
Spark plug
I
.
I Spark plug wrench with link (77229172000)
-
Plug in spark plug connector
Condition
The alternator is disconnected.
Stator winding - check the resistance.
Measure the resistance between the specified points.
CR
0
Alternator, connector
tor
CR
Alternator
Resistance of stator
winding at: 20 °C (68 °F)
If the indicated value does not correspond to the setpoint
value:
- Change the stator.
CR
pin - Measuring point
1 Ground
I
oo
n
8.
M10x1 10 ... 12 Nm (7.4
I
1
... 8.9 lbf ft)
. .
O.
pin - Alternator, connec­
CR 1
pin
1
1.19 ... 1 .61
1
(-)
(0 p. 315)
(0 p. 315)
n