H01741
H01740
Workshop Manual Ed. 03-2012
ENGINE DISASSEMBLY/REASSEMBLY
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.
Coolant pump rotor assembly
• Fit rotor (2).
• Fit screw (1).
Tightening torque figures
Coolant pump gear on pump shaft
M5 x 10 - 10.9, Microincapsulated
screw replacement
Coolant pump cover assembly
• Clean seal groove and bearing surface, check seal (6) and, if needed, re-
place it.
• Fit pump cover (5) with seal (6).
• Fit screw (3).
Tightening torque figures
Engine and crankcase fairing, screw connections
M6 x 45
• Fit screw (2).
Tightening torque figures
Engine and crankcase fairing, screw connections
M6 x 25
• Fit screws (1).
Tightening torque figures
Engine and crankcase fairing, screw connections
M6 x 30
F1.38
6 Nm
11 Nm
11 Nm
11 Nm