Number Plate Bulb Replacement (Te - Smr); Handlebar Switches; Left-Hand Switch (Tc) - Husqvarna TC 449 2011 I.E. Workshop Manual

ELECTRICAL SYSTEM
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Number plate bulb replacement (TE - SMR)

- Loosen screw (1) and remove the number plate bulb (2) from the mud-
guard.
2
1
H06323
- Extract the bulb holder (3) with the bulb (4) from the housing.
- Pull the bulb (4) to detach it from bulb holder.
Once the bulb has been replaced, reverse the above procedure to reassem-
ble.
(12V 5W bulb)

Handlebar switches

Measure continuity on the different switches using a meter. Replace any part
found to be faulty.

Left-hand switch (TC)

1 Engine stop switch (TC)
POSITION
ON
OFF
COLOUR
B-W Bk
M.49
Workshop Manual Ed. 03-2012