Clutch Hose Removal - Husqvarna TC 449 2011 I.E. Workshop Manual

1
2
7
6
Workshop Manual Ed. 03-2012
GENERAL PROCEDURES
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Clutch hose removal

- Loosen screw (1) (with a 8 mm wrench), and move number plate holder or
headlamp fairing.
H02468
- Loosen screw (2) (with a 8 mm wrench), and remove the cover (3).
3
H02467
- Loosen screw (4) (with a 8 mm wrench), and disconnect clamp (5) from
engine.
5
- Loosen clutch hose (7) union (6), and drain all oil out of hose. On reassembly,
bleed the clutch system as described in Section "P".
4
H02469
E.30