Shock Absorber Spring Preload Adjustment (Smr) - Husqvarna TC 449 2011 I.E. Workshop Manual

1
2
3
Workshop Manual Ed. 03-2012
SETTINGS AND ADJUSTMENTS
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Shock absorber spring preload adjustment (SMR)

Proceed as follows:
1. Remove the saddle and right-hand side panel, as described in the relevant
paragraph.
2. Clean lock ring nut (1) and adjuster ring nut (2) of the spring (3).
3. Either with a hook wrench or an aluminium punch, loosen the lock ring nut.
4. Turn the adjuster ring nut as required.
5. Adjust preload to suit your weight or riding style and tighten the lock ring nut
firmly (tightening torque 10 Nm - 1 Kgm - 7.38 ft-lb).
6. Refit the right-hand side panel and the saddle.
Be careful not to touch hot exhaust pipe while adjusting the shock
absorber.
A = SPRING IN ITS SEAT
B = CENTRE DISTANCE
H11155
H06420
D.22