Disassembly - Husqvarna WRE 125 2011 Workshop Manual

1
2
Ed. 05-2011
FRONT SUSPENSION

Disassembly

- Using a 30 mm Allen wrench, loosen upper cap (1)
- Completely loosen cap and remove it.
- Push slider (2) downwards onto inner tube.
H02792
- Screw a threaded bar (A) onto inner shock absorber rod.
- Pull absorber rod upwards using the bar and, at the same time, push upper
retainer (3) downwards with your hand so as to slide out the two split rings
(4).
A
- Remove bar.
- Slide out upper retainer.
4
3
H02793
- Drain all exhausted oil out of inner tube pumping the rod to full travel several
times.
- Take slider (2) out of inner tube.
2
H02794
I.7