Saddle Removal; Side Panel Removal; Battery Removal - Husqvarna WRE 125 2011 Workshop Manual

H02655
2
3
1
1
3
1
Ed. 05-2011
GENERAL PROCEDURES

Saddle removal

- Turn the rear fixing (1) counter clockwise and remove the saddle.
1

Side panel removal

1
- Remove the saddle as described in the relevant paragraph.
- Using an 8 mm wrench, loosen retaining screws (1) and remove side panels
(2) and (3).
H02708
1
2
1
H02709

Battery removal

- Remove the saddle as outlined in the relevant paragraph.
- Using an 8 mm Allen wrench, first remove the BLACK negative cable, then
the RED positive cable (when reassembling, first connect the RED positive
cable, then the BLACK negative cable); remove the battery (1) from its hous-
ing.
H06647
E.5