Headlight Unit With Front Fairing Removal - Husqvarna WRE 125 2011 Workshop Manual

4
7
5
Ed. 05-2011
ELECTRICAL SYSTEM

Headlight unit with front fairing removal

- Using an 8 mm wrench, loosen screw (1).
1
H02558
- Move headlamp fairing (2) forward, and lift it to release damping pads (3)
2
from their mounts (4).
H02559
- Open pipe support (5), and slide out front brake pipe (6) and speed sensor
cable (7).
- Disconnect headlight connector (8) and turning indicator connectors (9).
3
6
9
H02561
ON REASSEMBLY, MAKE SURE THAT DAMPING PADS (3) ARE
CORRECTLY INSTALLED INSIDE SUPPORTS (4).
8
M.19
9
H02562