Husqvarna WRE 125 2011 Workshop Manual page 214

2
3
3
4
1
ELECTRICAL SYSTEM
Securing the wiring harness
Bike main wiring harness consists of a main branch connecting control unit,
fuses, oil pump, flasher, dashboard, switches, TPS, generator and the various
1
available (air, water, stop, etc...) sensors and of a rear branch connecting tail
light, number plate light and rear turning indicators.
- Main wiring harness (1) starts on bike front side, passes through clip (2),
slides along chassis slanted tube, and is hold in place by clamps (3).
H02605
3
H02604
- On chassis rear side, wiring harness (1) passes above air filter fitting (4)
to connect to fuses, control unit and flasher, to air temperature sensor and
5
oil level sensor, and connects to rear wiring harness (5). Wiring harness is
secured in place with a clamp (6).
6
5
H02602
6
H02603
M.40 Ed. 05-2011