Intake Valve Disassembly - Husqvarna WRE 125 2011 Workshop Manual

9
10
2
ENGINE DISASSEMBLY
Loose the three retaining screws (8) on stator. Slide rubber block and plate (9)
8
out of left crankcase half, and remove the complete stator (10).
Remove the Woodruff key from crankshaft.
8
H06546

Intake valve disassembly

Using the special wrench part no. 8000 98431 loosen the four sealing screws
1
(1) on intake valve unit (2).
Slide out the carburettor-to-valve fitting.
1
H06547
F.12 Ed. 05-2011