A
C
1
Ed. 05-2011
SETTINGS AND ADJUSTMENTS
Assembly
To ensure tight fit, slightly (C) grease filter edge on side facing filter housing.
While re-inserting the filter into its housing, make surs that piece (A) is turned up-
wards and edge (B) is on the left lower side of the filter case. Reassemble the parts
previously removed.
When positioning the engine oil bowl, take care to correctly reposi-
tion pump intake hose (1), making also sure that it is not kinked.
B
If the element assembly is not installed correctly, dirt and dust may
enter and the engine resulting in rapid wear of the piston rings and
H02670
cylinder.
H02671
D.19