Tail Light Replacement - Husqvarna WRE 125 2011 Workshop Manual

3
Ed. 05-2011
ELECTRICAL SYSTEM
-
5 3
H02570
4
replacing it since the glass part shall not be touched with bare hands.
To replace the parking light bulb (5) extract it from the inside cover.
Once the bulb has been replaced, reverse the above procedure to reassem-
ble.
H02571

Tail light replacement

Remove the tail light as follows:
1
- Loosen the two screws (1) under the rear mudguard.
H02572
- Extract the tail light (2) and disconnect the connector (3).
Once the bulb has been replaced, reverse the above procedure to reassem-
ble.
2
H02573
release the bulb holder clips (3) and take out bulb (4);
Headlamp bulb (4) is of the halogen type (H4); be careful when
Be careful not to overtighten the screws.
M.23