Shock Absorber Spring Preload Adjustment - Husqvarna WRE 125 2011 Workshop Manual

Hide thumbs Also See for WRE 125 2011:
Table of Contents

Advertisement

5
4
Ed. 05-2011
SETTINGS AND ADJUSTMENTS

Shock absorber spring preload adjustment

Proceed as follows:
1. Turn the rear fixing (1) counter clockwise and remove the saddle, unscrew
the retaining screws (2) and remove the right-hand side panel (3).
2. Clean lock ring nut (4) and adjuster ring nut (5) of the spring (6).
3. Either with a hook wrench or an aluminium punch, loosen the lock ring nut.
4. Turn the adjuster ring nut as required.
5. Adjust preload to suit your weight or riding style and tighten the lock ring nut
firmly (tightening torque 40 Nm - 4 Kgm - 29.50 ft/lb).
6. Reassemble the R.H. side panel and the saddle.
Be careful not to touch hot exhaust pipe while adjusting the shock
absorber.
6
3
H02676
4
5
D.23
1
H02677
2
H02678
6
H02679

Advertisement

Table of Contents
loading

This manual is also suitable for:

2011 wre 1252011 sms 125

Table of Contents