Vocal Messages; Installer Access; Auto Log View; Daylight Savings - Electronics Line iconnect Installation Manual

9.13. Vocal Messages

The Vocal Messages option allows you to enable/disable vocal annunciation of system status. When this feature is
enabled, the system plays a short message to announce events such as arming and disarming.
To program the Vocal Messages option:
1. From the Programming menu, select System Options, Vocal Message [9413].
2. Select Enabled or Disabled.
The availability of the Vocal Message annunciation feature is hardware dependent.

9.14. Installer Access

The Installer Access option determines if the Installer code can access the system at all times or only after the Master
code provides authorization with the Enable Programming command – see p.27, 4.7.12 Enable Programming.
To program the Installer Access option:
1. From the Programming menu, select System Options, Install. Access [9414].
2. Select Always or User Initiated.

9.15. Auto Log View

Auto Log View is a future option that is not available in the current firmware. The default setting for this option is
disabled. Electronics Line 3000 recommends that you do not change this setting.

9.16. Daylight Savings

Using the Daylight Savings option, the system is able to automatically adjust its clock twice a year according to the
national adjustment to Daylight Saving Time.
Two options are available:
• Europe – the clock is adjusted forward 1hr on the last Sunday in March at 1am, the clock is adjusted back
1hr on the last Sunday in October at 1am.
• USA– the clock is adjusted forward 1hr on the second Sunday in March at 2am, the clock is adjusted back
1hr on the first Sunday of November at 2am.
To program the Daylight Savings option:
1. From the Programming menu, select System Options, Daylight Savings [9416].
2. Select Europe, USA or Disabled.
52
9 System Options
iConnect Installation Manual