Electronics Line iconnect Installation Manual page 32

4 Advanced System Operation
4.7.14. Remote Firmware Update
The Remote Firmware Update command enables a user with Master code authorization to initiate the update. This
feature is relevant only if the Remote Firmware Update mode is programmed as "User Initiated" – see p. 63, 10.8.4
Remote Firmware Update
To initiate Remote Firmware Update:
From the Service menu, select, SW Update [710]; a 24-hours time window is opened during which the Remote
Firmware Update may be performed.
4.7.15. IP Display
When using Ethernet connection, you can view the LAN IP address of the Control System, i.e. the address that your
home router has assigned to the Control System.
To display the IP Address:
From the Service menu, select IP Display [711]; the LAN IP address of the Control System is displayed.
28
iConnect Installation Manual