Microphone/Speaker Options; Vocal Messages; Installer Access; Auto Log View (Future Option) - Electronics Line Infinite Prime Installation Manual

9.12: Microphone/Speaker Options

In addition to the built-in microphone and speaker, the infinite prime control system supports
an external microphone/speaker
Microphone/Speaker option allows you to choose which microphone and speaker are in use.
You can choose one mic./speaker (internal or external) to function exclusively or both may
function simultaneously.
To program the Microphone/Speaker option:
1. From the Programming menu, select System Options, Mic./Speaker [9412].
2. Select Internal, External or Internal & External.

9.13: Vocal Messages

The Vocal Messages option allows you to enable/disable vocal annunciation of system
status. When this feature is enabled, the system plays a short message to announce
events such as arming and disarming.
To program the Vocal Messages option:
1. From the Programming menu, select System Options, Vocal Message [9413].
2. Select Enabled or Disabled.
The availability of the Vocal Message annunciation feature is hardware dependent.

9.14: Installer Access

The Installer Access option determines if the Installer code can access the system at all
times or only after the Master code provides authorization with the Enable Programming
command – see 4.7.11: Enable Programming.
To program the Installer Access option:
1. From the Programming menu, select System Options, Instal.
Access [9414].
2. Select Always or User Initiated.

9.15: Auto Log View (future option)

Auto Log View is a future option that is not available in the current firmware. The default
setting for this option is disabled. Electronics Line 3000 recommend that you do not
change this setting.

9.16: Daylight Savings

Using the Daylight Savings option, the system is able to automatically adjust its clock twice
a year according to the national adjustment to Daylight Saving Time.
Two options are available:
•
Europe – the clock is adjusted forward 1hr on the last Sunday in March at
1am, the clock is adjusted back 1hr on the last Sunday in October at 1am.
•
USA– the clock is adjusted forward 1hr on the first Sunday in April at 2am,
the clock is adjusted back 1hr on the last Sunday in October at 2am.
From 2007, Daylight Saving Time in the USA begins on the second Sunday in
March and ends on the first Sunday of November. This modification has been
accounted for in the firmware and the time shall be updated automatically
according to the new dates from 2007 onwards.
unit called the
-63-
"infinite-Interphone". The