Introduction; Accessing Error History Report; Error History Report - Xerox Phaser 6125 Service Manual

Error Messages and Codes

Introduction

Accessing Error History Report

Error History Report

3-2
This chapter describes error messages and numeric codes displayed on the
Control Panel or listed on the Error History page. These error indications
serve as the entry point into the troubleshooting process.
Troubleshooting of problems not directly indicated by or associated with an
error message or Chain Link code is covered in "General Troubleshooting" on
page 4-1. Print quality problems are covered in "Print-Quality
Troubleshooting" on page 5-1.
The printer tracks and reports errors in a number of ways. The two types of
error reporting discussed in this section include:
Error messages and Chain Link codes display on the Control Panel
Engine (fatal) and Jam Error logs display on the Control Panel or listed on
the Error History Report
1. From the Control Panel, press the Menu button.
2. Information Pgs is displayed. Press the OK button.
3. Press the Up or Down arrow button to find
button.
4. The Error History Report is printed. When printing is finished, the menu is
displayed.
The Error History Report provides a list of error messages and Chain Link
codes relating to Jam errors and System (fatal) errors. The printer can retain
up to 42 Jam errors and 42 System Fail errors.
For Chain Link codes, Chain number (0 to 999) and Link number (0 to 999)
are assigned. Chain numbers are assigned for each component. The
component number that detects the Fault is entered in the Chain code, and
the Fault type is defined by the Link code.
Examples of Error message and Chain Link code:
System Fail History
Chain Link: 018-310
Paper Jam History
Paper Jam Type: IOT Remain Registration Jam
Error
Phaser 6125/6130 Color Laser Printer Service Manual
History. Press the OK