Clutch Specifications; Final Reduction Specifications; Crankcase/Crankshaft; Specifications - Honda LEAD 110 2009 Service Manual

GENERAL INFORMATION
DRIVE PULLEY/DRIVEN PULLEY/CLUTCH SPECIFICATIONS
Drive belt width
Movable Bushing I.D.
drive face
Boss O.D.
Weight roller O.D.
Clutch Lining thickness
Clutch outer I.D.
Driven pulley Face spring free length
Driven face boss O.D.
Movable driven face I.D.

FINAL REDUCTION SPECIFICATIONS

Final reduction oil
capacity
Recommended final reduction oil
CRANKCASE/CRANKSHAFT SPECIFICATIONS
Crankshaft Connecting rod side clearance
Connecting rod radial clearance
Runout
1-8
ITEM
ITEM
After draining
After disassembly
ITEM
STANDARD
18.5 (0.73)
22.035 – 22.085 (0.8675 – 0.8695)
22.010 – 22.025 (0.8665 – 0.8671)
17.92 – 18.08 (0.706 – 0.712)
–
125.0 – 125.2 (4.92 – 4.93)
111.4 (4.39)
33.965 – 33.985 (1.3372 – 1.3380)
34.000 – 34.025 (1.3386 – 1.3396)

SPECIFICATIONS

0.10 liter (0.11 US qt, 0.09 lmp qt)
0.12 liter (0.13 US qt, 0.11 lmp qt)
API service classification: SG or higher
(except oils labeled as energy conserving on the circular
API service label)
Viscosity: SAE 10W-30
JASO T 903 standard: MB
STANDARD
0.10 – 0.35 (0.004 – 0.014)
0.004 – 0.016 (0.0002 – 0.0006)
–
Unit: mm (in)
SERVICE LIMIT
17.5 (0.69)
22.11 (0.870)
21.98 (0.865)
17.5 (0.69)
2.0 (0.08)
125.5 (4.94)
108.0 (4.25)
33.94 (1.336)
34.06 (1.341)
Unit: mm (in)
SERVICE LIMIT
0.55 (0.022)
0.05 (0.002)
0.10 (0.004)