Connecting The Mailing Machine To An Inserter - Neopost IJ-15K User Manual

1.3 Connecting The Mailing Machine To An Inserter

Three CONTROLLER modes are available:
NOT CONN.: A physical connection between the mailing machine
- The mailing machine is positioned at the end of the inserter.
- Mailing machine and inserter do not control each other.
- Used for printing a single postage value (rate).
ELECTRO : An electronic connection using a cable between the
- A cable is attached from the mailing machine's inserter
- Inserter controls the mailing machine.
- Used when a customer only requires three rates.
SERIAL :
- A cable is connected from the mailing machine's serial port to
- Inserter controls the mailing machine.
- Used when a customer requires more than three rates.
Selecting CONTROLLER Mode:
- From the main screen, press
- Select NOT CONN., ELECTRO, or SERIAL.
4131934X/C
17/09/2008
and inserter.
mailing machine and inserter.
connection port to the inserter.
A serial connection which requires a specific serial
port setup by your service provider.
the inserter.
- Press . The following screen will be displayed:
OK
USER SETUP
LANGUAGE
BUZZER
CONTRAST
CONTROLLER
HOME HOME LOGOUT
and select USER SETUP.
MENU
SUPER... DISPL...
AMERICAN ENGLISH
OFF ON ERR ON KEY
16
- 16
+
ELECTRO SERIAL
NOT CONN.
DEFLT
Overall presentation
ORIG0060-21
OK
21