Control Panel Parts And Functions - Canon imageRUNNER ADVANCE C2230 Manual

Control Panel Parts and Functions

1
19
18
17
1
[Main Menu]
Press to display the Main Menu screen. If the Main Menu screen is
not displayed when using a function, it is necessary to press [Main
Menu] before using the function.
2
Touch Panel Display
The settings screen for each function is shown on this display. Six
function keys are displayed by default.
3
Numeric keys
Press to enter numerical values.
4
Energy Saver key
Press to set or cancel the Sleep mode. Lights when the machine
enters the Sleep mode.
5
Settings/Registration key
Press to specify settings/registration.
6
Counter Check key
Press to display the copy and print count totals on the touch
panel display.
7
Stop key
Press to stop a job in progress, such as a scan, copy, or fax
(scanning only) job.
8
Edit Pen
Use when operating the touch panel display, such as to enter
characters.
9
Start key
Press to start an operation.
10
Main Power Indicator
Lights when the main power is turned ON.
34
2
16
3
15
14
12
11
Error Indicator
Flashes or lights if there is an error in the machine. When the Error
indicator flashes, follow the instructions that appear on the touch
panel display. When the Error indicator maintains a steady red
light, contact your local authorized Canon dealer.
12
Processing/Data Indicator
Flashes or blinks green when the machine is performing
operations, and maintains a steady green light when fax data is
stored in memory.
13
Clear key
Press to clear entered values or characters.
14
Reset key
Press to restore the standard settings of the machine.
15
ID (Log In/Out) key
Press to log in/out when a login service such as Department ID
Management or SSO-H has been set.
16
Brightness Adjustment Dial
Use to adjust the brightness of the touch panel display.
17
Volume Settings key
Press to display the screen for adjusting settings, such as the
transmission volume and fax sending/receiving alarm volume.
18
[Status Monitor/Cancel]
Press to check the status of jobs or to cancel print jobs. Also, you
can check the status of the machine such as the amount of paper
remaining in the paper source.
19
[Quick Menu]
Press to display functions registered in the Quick Menu.
4
5
6
7
13
9
8
11 10