Available Combination Of Options - Canon IMAGERUNNER 2030 i Reference Manual

Available Combination of Options

The table shown below describes the optional equipment that is needed to use
each function, the available combination of options that can be installed
simultaneously, and the limitations when installing optional equipment.
Machine Function
Fax Function
Bar Code Printing
Function
Collate
Group
Offset
Staple
Additional Copy
Tray
Department ID
Management *1
Additional Paper
Supply
*1 The Department ID Management function is a standard function in this machine. If the optional Card Reader-E1 is
attached, Department ID Management is performed automatically, and you do not have to enter the Department ID
and password manually. For detailed information on Department ID Management, see "Department ID
Management," on p. 6-6.
Optional Equipment
Needed
Super G3 FAX Board
Barcode Printing Kit
Finisher-U2
Inner 2 Way Tray-E2
Additional Finisher
Tray-C1
Card Reader-E1
Cassette Feeding
Module-P1 or Q1
Simultaneous Installation
Required Limitations
-
-
The Inner 2 Way Tray-E2
- cannot be used with the
Finisher-U2.
The Finisher-U2 and
Additional Finisher
- Tray-C1 cannot be used
with the Inner 2 Way
Tray-E2.
The Additional Finisher
Tray-C1 cannot be used
Finisher-U2
with the Inner 2 Way
Tray-E2.
-
The Cassette Feeding
Module-P1 cannot be
- used with the
imageRUNNER 2030i/
2025i/2022i.
System Configuration
-
-
3
-
3-5