Micro Memory Card (Mmc) - Siemens SINAMICS CU240S DP-F Operating Instructions Manual

Spare parts/Accessories

11.3 Micro Memory Card (MMC)

11.3 Micro Memory Card (MMC)
The MMC is used to save parameters from a Control Unit.
Thus saved parameter set can be transferred to another Control Unit. In the
case of service, the drive system is immediately ready for use, e. g. after
swapping an inverter.
The MMC stores up to 100 parameter sets and supports series commissioning
without using additional commissioning tools as BOP or STARTER.
The commissioning of MMC depends on user settings (Parameter p8458)
Note
The inverter can be operated with or without MMC plugged in.
208
Operating Instructions, 07/2008 - FW 3.2, A5E00766042B AD
Control Units CU240S