Siemens SINAMICS CU240S DP-F Operating Instructions Manual page 159

Information about the parameter response:
● Request_reference_mirror:
● Response_ID:
● Drive_object_ID_mirrored:
● No_of_parameters:
● Format_parameter_1:
● No_of_values_parameter_1:
● Format_Parameter_2:
● No. of values_Parameter_2:
Control Units CU240S
Operating Instructions, 07/2008 - FW 3.2, A5E00766042B AD
This response belongs to the request with request reference 0x01.
0x01 --> Read request positive, values stored as 1st value.
The values correspond to the values from the request.
The values correspond to the values from the request.
0x06 --> Parameter values are in Unsigned16 format.
0x08 --> 8 parameter values are available.
– 1. value ... 8. value:
error_codes_01
...
error_codes_08
0x06 --> Parameter values are in Unsigned16 format.
0x08 --> 8 parameter values are available.
– 1. value ... 8. value:
error_values_01
...
error_values_08.
Communication
6.4 Communication via PROFIBUS
159