Siemens SINAMICS CU240S DP-F Operating Instructions Manual page 113

Grouping
The parameters are sub-divided into groups according to their functionality. This increases
the transparency and allows a quicker and more efficient search for specific parameters.
Furthermore, parameter P0004 can be used to control the specific group of parameters that
are displayed on the BOP.
Table 5-20
Grouping
ALWAYS
INVERTER
MOTOR
ENCODER
TECH_APL
COMMANDS
TERMINAL
SETPOINT
Safety integrated
FUNC
CONTROL
COMM
ALARMS
TECH
Active
This attribute is only of importance in conjunction with an BOP. The "Yes" attribute indicates
that this value is immediately accepted when it is changed. Especially parameters which are
used for optimization functions have this property (e.g. constant voltage boost P1310 or filter
time constants). On the other hand, for parameters with the attribute "First confirm", the
value is only accepted after first pressing the key
parameters where the parameter value can have different settings/meanings (e.g. selecting
the frequency setpoint source P1000).
Table 5-21
Active
Yes
First confirm
Note
Parameter values that are changed using STARTER or a higher-level control do not have to
be acknowledged.
Control Units CU240S
Operating Instructions, 07/2008 - FW 3.2, A5E00766042B AD
Parameter attributes - Grouping
Description
0 all parameters
2 inverter parameters
3 motor parameters
4 speed encoder
5 technical applications/units
7 control commands, digital I/O
8 Analog inputs/outputs
10 Setpoint channel and ramp-function gen.
11 Fail-safe functions
12 Inverter functions
13 Motor open-loop/closed-loop control
20 Communications
21 Faults, warnings, monitoring functions
22 Technology controller (PID controller)
Parameter attributes - Active
Description
The value becomes valid immediately.
The value becomes valid after pressing
Main parameter
area:
0200 ... 0299
0300 ... 0399 and
0600 ... 0699
0400 ... 0499
0500 ... 0599
0700 ... 0749 and
0800 ... 0899
0750 ... 0799
1000 ... 1199
9000 ... 9999
1200 ... 1299
1300 ... 1799
2000 ... 2099
0947 ... 2199
2200 ... 2399
. These include, for example,
Commissioning
5.9 Parameters
113