Description - Siemens SINAMICS CU240S DP-F Operating Instructions Manual

Description

The SINAMICS G120 range
The SINAMICS G120 inverter has been designed for the accurate and efficient control of the
speed and torque for three-phase motors. The SINAMICS G120 system comprises two basic
modules, the Control Unit (CU) and the Power Module (PM).
The Control Units are divided into the following:
● Standard CUs (CUs without fail-safe functions)
● CUs with fail-safe functions
The Power Modules are divided as follows:
● PM240 Power Module with dc braking functions, supply voltage 3 AC 400 V
● PM250 Power Module with regenerative mode, supply voltage 3 AC 400 V
● PM260 Power Module with regenerative mode, supply voltage 3 AC 690 V
Control Units and Power Modules are allowed to be combined in any possible configuration.
See the respective manual for specific functions and features.
This manual describes functions and features of the control units
● CU240S
● CU240S-DP
● CU240S DP-F
● CU240S PN
● CU240S PN-F
Control Units CU240S
Operating Instructions, 07/2008 - FW 3.2, A5E00766042B AD
– CU240E economic version of the CU240 control units (e.g. less terminals, no encoder
interface)
– CU240S standard version of the CU240 control units
– CU240S DP like CU240S plus PROFIBUS DP interface (PROFIdrive Profile V4.1)
– CU240S PN like CU240S plus PROFINET interface (PROFIdrive Profile V4.1)
– CU240S DP-F like CU240S DP plus integrated fail-safe functions
– CU240S PN-F like CU240S PN plus integrated fail-safe functions
3
15