Flueing - Rinnai RIB2310MN Operation & Installation Manual

HEATER ENGINE - GENERAL INSTALLATION

FLUEING

The following diagrams illustrate the flue installation options that are available for the Sapphire
flame. Only the genuine Rinnai Flamefire (FLF) flue is certified as part of the Rinnai Sapphire
WARNING
space heaters.
Only an authorised person must install, service and remove the Rinnai Sapphire space heater &
flue system.
Only the flue system components described in the 'Flueing Installation Manual For Rinnai
Flamefire Heaters' that is provided with the flue kit must be used.
Components that are not described in that manual, whether manufactured by Rinnai or otherwise,
are not compatible and must not be used.
Rinnai appliance warranty conditions may be voided if non Rinnai flue components are fitted.
Inbuilt
(Masonry)
Inbuilt
(Zero Clearance)
Free Standing
(Console & Plinth)
Install the Rinnai rigid flue system components in accordance with the 'Flueing Installation Manual For Rinnai
Flamefire Heaters' that are provided with the flue kit.
For masonry installation details refer to "MASONRY FLUE INSTALLATION" on page 30.
NOTE
Rinnai Australia
Direct flue Offset flue
Direct flue Offset flue
29 Sapphire Operation & Installation Manual