About Your Heater; General Description - Rinnai RIB2310MN Operation & Installation Manual

Gas log flame fire

Hide thumbs

Table of Contents

GENERAL DESCRIPTION

Your Sapphire is a burning log effect, gas space heating appliance with natural draft combustion system, intended

for use with Natural Gas, Propane and ULPG. The Burning log effect is achieved using one single main burner with

strategically placed, 'life like', imitation logs and granules. Temperature control is achieved by pressing the up or

down marked arrows on the manual control switch or via a cordless wall mounted remote control thermostat / timer.

This heater has an electronic ignition with intermittent pilot. The pilot is only on when the heater is in operation.

Burner, logs and granules are contained in a glass fronted, sealed burner box.

Combustion air is drawn from the room. Combustion product is exhausted via the flue discharge vent when

installed in a masonry chimney or when installed in a zero clearance box or as a stand alone unit through a

100mmØ x 150mmØ twin skinned flue to the outside of the house.

This appliance is modular and primarily consists of an 'Engine' that is utilized in any of the 3 configuration types as

listed below.

1. Fireplace / Masonry installation - Engine:

The appliance is directly mounted into an existing masonry fire place or a non-combustible/masonry enclosure

that has a chimney. When installed correctly the appliance is a flush to wall mount.

2. Zero Clearance installation:

The Appliance is fitted within a sheet metal Zero Clearance Box Assembly that has been installed into a wall or

other suitable structure. Materials need not be non-combustible. When installed correctly the appliance is a

flush to wall mount.

3. Freestanding Plinth or Console appliance:

The appliance is housed in a decorative fabricated sheet metal box that is intended to be freestanding and not

inbuilt.

MASONRY

PLINTH

Rinnai Australia