Flueing; Flue Installation Options - Rinnai RDV600ER Installation Manual

FLUEING

FLUE INSTALLATION OPTIONS

The following diagrams illustrate the flue installation options that are available for the RDV600ER
and RDV700ER space heaters. ONLY the genuine Rinnai flue is certified as part of the space
heaters installation requirements.
WARNING
ONLY an authorised person MUST install, service and remove the Rinnai RDV600ER and
RDV700ER space heater and flue system.
Only the flue system components described in this Manual are suitable and MUST be used. 'DO
NOT USE AN UNLINED MASONRY CHIMNEY AS THE FLUE FOR THIS APPLIANCE'.
Components that are not described in that manual, whether manufactured by Rinnai or otherwise,
are NOT compatible and MUST NOT be used.
Rinnai appliance warranty conditions may be voided if non Rinnai Flue Components are fitted.
AS/NZS 5601 "GAS INSTALLATIONS" requires that flue components be supported independently
of the appliance.
FLUE INSTALLATION OPTIONS
Masonry
i
A
C
B
H
ii
D D
E
i. Vertical
ii. Horizontal
(A)
Masonry (Co-linear) cowl
(B) Co-linear to coaxial adaptor & support plate/mount
(C)
Flexi pipes (100Ø exhaust / 75Ø air intake)
(D)
Spigot plate (this is part of the heater engine)
(E)
Heater engine
(F)
Coaxial pipe components (170Ø outer pipe, a max of 2 x 45º bends ONLY are allowed)
(G) Vertical cowl
(H)
Horizontal terminal
(I)
Weather proof box.
Rinnai
False Fire Place / Raised Fire Place
i
A
ii
F
C
B
D
E
ii. Vertical Offset
iii. Horizontal
G
iii
H
F
B
F
C
D
E
i. Vertical
12
Weather Proof Box
B
H
C
D
E
I
Reduces the internal
footprint requirements
of the heater engine
RDV 600_700ER IM
C
E