About Your Heater; General Overview - Rinnai 650 Operation Manual

ABOUT YOUR HEATER

GENERAL OVERVIEW

7
Push button control panel
1
a ON / OFF button
b Standby / ON button:
Glass Dress Guard (as
2
part of fascia)
Flame Window
3
Warm air discharge vent
4
Return Air Vent
5
Remote (IR) Control
6
Receiver Window
Viewing window for error
7
code display
Remote (IR) Control
8
c Standby / ON button:
d Flame Up / Down
buttons:
e Room temperature
display
Rinnai
4
6 b a
5
Controls appliance operation between Standby and ON modes.
Controls appliance operation between ON and OFF.
See "Remote Control Operation" on page 10
Ceramic log set and burner media or ceramic stone set and burner media
(Green Indicator) Flashes during the pilot ignition and glows solid when
pilot is established, going out once heating operation commences. Flashes
to acknowledge remote control inputs.
Located behind the fascia. See ERROR CODES on page 12
See "Remote Control Operation" on page 10.
See "Remote Control Operation" on page 10.
Displays the current temperature of the room in which the control is located.
See "Remote Control Operation" on page 10.
8
8
2
3
Note: The three sided fascia and ceramic
log set are shown for illustrative purposes
1
c
d
e
RDV 600_700ER OM