About Your Heater; General Overview - Rinnai LS Series Operation Manual

ABOUT YOUR HEATER

GENERAL OVERVIEW

G
H
I
J
Standby / ON button:
A
Remote (IR) receiver window:
B
Wi-Fi reset switch:
C
Wi-Fi receiver module:
D
Warm air discharge:
E
Burner box window / Dress guard:
F
Standby / ON button:
G
Flame Up / Down buttons:
H
Room temperature display:
I
Room temperature sensor
J
Rinnai
E
A
B
D
Model RHFE800 shown for reference
Controls appliance operation between Standby and ON modes.
(Green Indicator) Flashes during the pilot ignition and glows solid when
pilot is established, going out once heating operation commences.
Flashes to acknowledge remote control inputs.
Resets the Wi-Fi module, see "Wi-Fi / App Operation" on page 12.
See "Wi-Fi / App Operation" on page 12.
On double sided models, these features are duplicated on both the
front and the back of the appliance.
See "Remote Control Operation" on page 10.
See "Remote Control Operation" on page 10.
Displays the current temperature of the room in which the control is
located. See "Remote Control Operation" on page 10.
Senses the temperature of the room in which the control is located.
F
C
8 RHFE0800_1000_1500 OM