About Your Heater; General Description; Design Features - Rinnai RIBF25N Operation & Installation Manual

GENERAL DESCRIPTION

Your Slimfire is a burning log effect, gas space heating appliance with natural draft combustion system, intended
for use with Natural Gas and Propane. The burning log effect is achieved using two main burners with strategically
placed, 'life like', imitation logs and granules. Temperature control is achieved through manual push button control.
This heater has an electronic ignition. The pilot is only on when the heater is in operation.
Burner, logs and granules are contained in a glass fronted, sealed burner box.
Combustion air is drawn from the room. Combustion product is exhausted via the flue discharge vent when
installed in a masonry chimney or when installed in a zero clearance box through a 100mmØ x 150mmØ twin
skinned flue to the outside of the house.
1. Fireplace / Masonry installation - Engine:
The appliance is directly mounted into an existing masonry fire place or a non-combustible/masonry enclosure
that has a chimney. When installed correctly the appliance is a flush to wall mount.
2. Zero Clearance installation:
The appliance is fitted within a sheet metal Zero Clearance Box Assembly that has been installed into a wall or
other suitable structure. Materials need not be non-combustible. When installed correctly the appliance is a
flush to wall mount.

DESIGN FEATURES.

Rinnai Slimfire Heater
1
Push button control panel
2
Ignition / Low button
a
Medium button
b
High button
c
Glass dress guard
3
Flame window - artificial log set and burn media
4
Warm air discharge vent
5
Return air vent
6
Alternative power cable outlet location on front panel can be left or right handed
7
Rinnai Australia

ABOUT YOUR HEATER

c
b
1
a
7
3
4
5
2
6
6
7
Slimfire 252 Operation & Installation Manual