Cinema Projector Power States; Cinema Projector Led Status Indicators - Christie CP2210 User Manual

Section 3: Operation
5.3

Cinema Projector Power States

The following table identifies what occurs when the TPC's Power and Lamp buttons are tapped during any of
the cinema projector's 4 main power states. See Table
Table 5.1 cinema projector Status when any TPC Lamp or Power Buttons Selected
Power ON
Power OFF
Lamp ON
Lamp OFF
5.4

Cinema Projector LED Status Indicators

Red, yellow, and green LEDs on the top and rear corners of the cinema projector indicate the status of the
cinema projector. The LEDs can be solidly lit, or they can flash frequently or intermittently. This table lists the
LED state and the associated meaning:
Table 5.2 Cinema Projector Status LED Legend
LED
Solid Green
Green Blip
Solid Yellow
Yellow Blip/
Green Blip
Flashing Red
Solid Red
5-2
Standby Power Mode
(Solid Yellow)
To full power ON
(boot delay)
No action
To power ON and
lamp ON (boot delay)
No action
State Description
Lamp ON Power is ON, Lamp is ON.
Power ON Power is ON, Lamp is OFF. The lamp can be struck when in this mode.
Standby mode Power is OFF, Lamp is OFF. Power saving mode.
Cool down mode Transitioning to Standby mode. Power is ON, Lamp is OFF.
The lamp can be struck when in this mode.
New critical alarm New critical alarm or warning has NOT been acknowledged by operator.
or warning
Existing critical Critical alarm or warning exists, but has been acknowledged by operator.
alarm or warning
5.1.
cinema projector's Current State:
Power ON/ Lamp OFF Power ON / Lamp ON
(Green Blip) (Solid Green)
No action No action
Power OFF Lamp OFF
immediately (immediately), enters
cool down mode
To lamp ON No action
(immediately)
No action Lamp OFF
(immediately)
Cooling Down
Mode (Yellow Blip/
Green Blip)
Cancels cool down,
goes into full
power
No action
Cancels cool down,
goes to Lamp ON
(immediately)
No action
CP2210 User Manual
020-100410-08 Rev. 1 (05-2014)